Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

5215J25A cross-reference: 215SMT25, TA5215H25, TXT525, 307TR | Replacement Intelligence

Home/Cross-reference/5215J25A

Manufacturer-published cross-reference

5215J25A

Falk / Rexnord SMR cross-table row · 25:1 · AGMA unit size 215

PublisherFalk / RexnordCheckedSep 21, 2026

Claim typePublished manufacturer cross-referenceRatio25:1AGMA unit size215Open source table ↗

Models printed in this source row8

Publisher targetFalk / Rexnord5215J25A

Published comparisonBrowning215SMT25

Published comparisonDodge Torque-Arm IITA5215H25

Published comparisonDodge TXTTXT525

Published comparisonDorris307TR

Published comparisonFalk 40004215J25C

Published comparisonLink-Belt215FX25

Published comparisonSumitomo / Fenner307 H

What the evidence supportsClaim scope

Rexnord Table 1 publishes Falk 5215J25A with the listed competitor models for a 10 hp / 20 rpm selection at 1.0 service factor and 25:1 nominal ratio.

This page does say

These model numbers appear together in the cited manufacturer-published cross-reference row.
Falk / Rexnord identifies 5215J25A as the target model in that published row.
The source associates the row with 25:1 and AGMA unit size 215.

This page does not say

Every competitor model listed beside each other is independently certified as pairwise interchangeable.
Every installed accessory, bushing, motor mount, backstop, shaft, or screw-conveyor component will transfer unchanged.
The cross-reference removes the need to verify application torque, mounting, environment, and configuration.

Before treating it as a drop-in replacementVerification checklist

Ratio & speedVerify the actual ratio and required output speed.

Bushing / boreConfirm the installed shaft diameter and the required tapered bushing or bore arrangement.

AccessoriesCheck torque arm, backstop, motor mount, belt guard, screw-conveyor flange and drive shaft individually.

Torque & serviceConfirm continuous/peak torque, service factor, starts, shock load and thermal duty.

EnvelopeVerify center height, housing clearance and all mounting dimensions against the drawing.

EnvironmentConfirm lubricant, seals, ambient temperature, washdown/corrosion and hazardous-area requirements.

Search another model Field replacement checklist Source PDF ↗