Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

5507J25A cross-reference: 507SMT25, TA9415H25, TXT1024, 507TR | Replacement Intelligence

Home/Cross-reference/5507J25A

Manufacturer-published cross-reference

5507J25A

Falk / Rexnord SMR cross-table row · 25:1 · AGMA unit size 507

PublisherFalk / RexnordCheckedSep 21, 2026

Claim typePublished manufacturer cross-referenceRatio25:1AGMA unit size507Open source table ↗

Models printed in this source row8

Publisher targetFalk / Rexnord5507J25A

Published comparisonBrowning507SMT25

Published comparisonDodge Torque-Arm IITA9415H25

Published comparisonDodge TXTTXT1024

Published comparisonDorris507TR

Published comparisonFalk 40004507J25C

Published comparisonLink-Belt507D24

Published comparisonSumitomo / Fenner507 L

What the evidence supportsClaim scope

Rexnord Table 1 publishes Falk 5507J25A with the listed competitor models for a 75 hp / 30 rpm selection at 1.0 service factor and 25:1 nominal ratio.

This page does say

These model numbers appear together in the cited manufacturer-published cross-reference row.
Falk / Rexnord identifies 5507J25A as the target model in that published row.
The source associates the row with 25:1 and AGMA unit size 507.

This page does not say

Every competitor model listed beside each other is independently certified as pairwise interchangeable.
Every installed accessory, bushing, motor mount, backstop, shaft, or screw-conveyor component will transfer unchanged.
The cross-reference removes the need to verify application torque, mounting, environment, and configuration.

Before treating it as a drop-in replacementVerification checklist

Ratio & speedVerify the actual ratio and required output speed.

Bushing / boreConfirm the installed shaft diameter and the required tapered bushing or bore arrangement.

AccessoriesCheck torque arm, backstop, motor mount, belt guard, screw-conveyor flange and drive shaft individually.

Torque & serviceConfirm continuous/peak torque, service factor, starts, shock load and thermal duty.

EnvelopeVerify center height, housing clearance and all mounting dimensions against the drawing.

EnvironmentConfirm lubricant, seals, ambient temperature, washdown/corrosion and hazardous-area requirements.

Search another model Field replacement checklist Source PDF ↗