Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

NORD DRIVESYSTEMS SK92672 Replacement | Winsmith X6A | Replacement Intelligence

Manufacturer comparison guide

NORD DRIVESYSTEMS SK92672 replacement

Winsmith X6A appears in the same manufacturer-published cross-reference row as NORD DRIVESYSTEMS SK92672 at Match installed ratio/application · Winsmith HXB size X6A.

Published targetX6AWinsmithMatch installed ratio/application

Evidence publisherWinsmithEvidence typeComparison guideReviewedSep 21, 2026Open source ↗

Replacement referenceDirectional lookup

Existing / searched modelNORD DRIVESYSTEMSSK92672

Published target modelWinsmithX6AOpen target specs →

What the source establishesComparison guide

Winsmith publishes HXB X6A in its 2025 interchange guide beside the listed competitor models. The guide distinguishes 100% interchangeable mounting from slightly different mounting; verify the source key, dimensions, ratio and application before ordering.

Evidence meaning

The manufacturer publishes these models together in an interchange/comparison guide.

NORD DRIVESYSTEMS SK92672 and Winsmith X6A are tied by the published source at Match installed ratio/application · Winsmith HXB size X6A.

Evidence boundary

The guide may include mounting or configuration differences; confirm the source key and exact dimensions before substitution.

Published target specifications3 model-level fields

WinsmithX6AHXB Helical Bevel

Full model record →

Published torque: 3629 lbf-inSource ↗
Interchange source: Winsmith 2025 Aluminum and Helical Interchange GuideSource ↗
Published size: HXB X6ASource ↗

Other models in the same published row1

SEW-EURODRIVEK47Same Match installed ratio/application published row →

Replacement verification checklistBefore purchase

RatioConfirm nominal and actual ratio against required output speed.

Shaft / boreMeasure the driven shaft and verify bushing or bore configuration.

InputCheck high-speed shaft, motor frame, sheave and input interface.

MountingCompare center height, footprint, torque-arm geometry and housing clearances.

AccessoriesDo not assume existing backstops, motor mounts, belt guards or screw-conveyor hardware transfer.

DutyRecheck torque, service factor, shock, starts per hour, temperature and lubrication.

Open X6A specifications Full published row Field checklist Source document ↗