Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

SEW-EURODRIVE R97 Replacement | Falk / Rexnord 09UC | Replacement Intelligence

Manufacturer dimensional interchange

SEW-EURODRIVE R97 replacement

Falk / Rexnord 09UC appears in the same manufacturer-published cross-reference row as SEW-EURODRIVE R97 at Verify installed ratio / motor speed · Ultramite UC.

Published target09UCFalk / RexnordVerify installed ratio / motor speed

Evidence publisherFalk / RexnordEvidence typeDimensional interchangeReviewedSep 21, 2026Open source ↗

Replacement referenceDirectional lookup

Existing / searched modelSEW-EURODRIVER97Open source-model record →

Published target modelFalk / Rexnord09UCOpen target specs →

What the source establishesDimensional interchange

Falk/Rexnord publishes 09UC in the 281-810 Ultramite dimensional interchange guide beside the listed SEW models. Rexnord instructs users to verify motor speed, ratio, mounting position, and current catalog ratings/dimensions before interchange.

Evidence meaning

The manufacturer publishes the two models in a dimensional-interchange table or equivalent dimensional comparison.

SEW-EURODRIVE R97 and Falk / Rexnord 09UC are tied by the published source at Verify installed ratio / motor speed · Ultramite UC.

Evidence boundary

Dimensional alignment does not by itself prove identical torque, thermal rating, service factor, ratio, accessories, or application suitability.

Published target specifications3 model-level fields

Falk / Rexnord09UCUltramite UC

Full model record →

Representative output torque at ~25:1 / 1750 rpm: 22163 lb-inSource ↗
Interchange basis: Falk Ultramite 281-810 dimensional interchange tableSource ↗
Ultramite type: UCSource ↗

Other models in the same published row1

SEW-EURODRIVER92/3Same Verify installed ratio / motor speed published row →

Replacement verification checklistBefore purchase

RatioConfirm nominal and actual ratio against required output speed.

Shaft / boreMeasure the driven shaft and verify bushing or bore configuration.

InputCheck high-speed shaft, motor frame, sheave and input interface.

MountingCompare center height, footprint, torque-arm geometry and housing clearances.

AccessoriesDo not assume existing backstops, motor mounts, belt guards or screw-conveyor hardware transfer.

DutyRecheck torque, service factor, shock, starts per hour, temperature and lubrication.

Open 09UC specifications Full published row Field checklist Source document ↗