Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

RF60 → 862BF/863BF replacement

Manufacturer functional interchange

SEW-EURODRIVE RF60 replacement

Boston Gear 862BF/863BF appears in the same manufacturer-published cross-reference row as SEW-EURODRIVE RF60 at Match installed ratio/application · Boston 800 size 860 · Output flange mounted.

Published target862BF/863BFBoston GearMatch installed ratio/application

Evidence publisherBoston GearEvidence typeFunctional interchangeReviewedSep 21, 2026Open source ↗

Replacement referenceDirectional lookup

Existing / searched modelSEW-EURODRIVERF60Open source-model record →

Published target modelBoston Gear862BF/863BF

What the source establishesFunctional interchange

Boston Gear publishes 862BF/863BF for 800 Series size 860 in the output flange mounted column of its in-line helical interchange guide. Boston states the 800 Series is designed to be functionally interchangeable with listed drives while requiring verification of ratings and dimensions.

Evidence meaning

The manufacturer describes the target family as functionally interchangeable with the listed competitor model or configuration.

SEW-EURODRIVE RF60 and Boston Gear 862BF/863BF are tied by the published source at Match installed ratio/application · Boston 800 size 860 · Output flange mounted.

Evidence boundary

The source still requires ratings, dimensions, ratio, fit, and application conditions to be checked before ordering.

Other models in the same published row7

David BrownM062(3)FRNSame Match installed ratio/application published row →Falk06UCFN2(3)-NSame Match installed ratio/application published row →FlenderEF40/ZF40/DF40Same Match installed ratio/application published row →NORD DRIVESYSTEMSSK22(3)F-WSame Match installed ratio/application published row →SEW-EURODRIVERF63Same Match installed ratio/application published row →STOBERC202/3F-AWSame Match installed ratio/application published row →SumitomoHF3110/15Same Match installed ratio/application published row →

Replacement verification checklistBefore purchase

RatioConfirm nominal and actual ratio against required output speed.

Shaft / boreMeasure the driven shaft and verify bushing or bore configuration.

InputCheck high-speed shaft, motor frame, sheave and input interface.

MountingCompare center height, footprint, torque-arm geometry and housing clearances.

AccessoriesDo not assume existing backstops, motor mounts, belt guards or screw-conveyor hardware transfer.

DutyRecheck torque, service factor, shock, starts per hour, temperature and lubrication.

Full published row Field checklist Source document ↗