Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

C002F-AW → 832BF/833BF replacement

Manufacturer functional interchange

STOBER C002F-AW replacement

Boston Gear 832BF/833BF appears in the same manufacturer-published cross-reference row as STOBER C002F-AW at Match installed ratio/application · Boston 800 size 830 · Output flange mounted.

Published target832BF/833BFBoston GearMatch installed ratio/application

Evidence publisherBoston GearEvidence typeFunctional interchangeReviewedSep 21, 2026Open source ↗

Replacement referenceDirectional lookup

Existing / searched modelSTOBERC002F-AWOpen source-model record →

Published target modelBoston Gear832BF/833BF

What the source establishesFunctional interchange

Boston Gear publishes 832BF/833BF for 800 Series size 830 in the output flange mounted column of its in-line helical interchange guide. Boston states the 800 Series is designed to be functionally interchangeable with listed drives while requiring verification of ratings and dimensions.

Evidence meaning

The manufacturer describes the target family as functionally interchangeable with the listed competitor model or configuration.

STOBER C002F-AW and Boston Gear 832BF/833BF are tied by the published source at Match installed ratio/application · Boston 800 size 830 · Output flange mounted.

Evidence boundary

The source still requires ratings, dimensions, ratio, fit, and application conditions to be checked before ordering.

Other models in the same published row5

David BrownM032(3)FRNSame Match installed ratio/application published row →Falk03UCFN2(3)-NSame Match installed ratio/application published row →FlenderEF20A*Same Match installed ratio/application published row →NORD DRIVESYSTEMSSK02-WSame Match installed ratio/application published row →SumitomoHF3090/95/97Same Match installed ratio/application published row →

Replacement verification checklistBefore purchase

RatioConfirm nominal and actual ratio against required output speed.

Shaft / boreMeasure the driven shaft and verify bushing or bore configuration.

InputCheck high-speed shaft, motor frame, sheave and input interface.

MountingCompare center height, footprint, torque-arm geometry and housing clearances.

AccessoriesDo not assume existing backstops, motor mounts, belt guards or screw-conveyor hardware transfer.

DutyRecheck torque, service factor, shock, starts per hour, temperature and lubrication.

Full published row Field checklist Source document ↗