Industrial replacement referenceSource-backed records · No compatibility guesswork
RIReplacement Intelligence
Menu

Dishwashers · parts

GDT655SBL5TS: GE catalog dishwasher parts

GE Appliances Parts lists 10 selected components for exact dishwashers model GDT655SBL5TS across 1 diagram section(s): UPPER RACK ASSEMBLY. This reference preserves each position and original part number, then identifies a successor only where GE explicitly prints one. Match the full appliance label and assembly before ordering or requesting a service quote.

Safety boundary

  • These entries identify catalog parts and give no removal, installation or internal repair procedure.
  • The exact owner's manual controls accessible maintenance; use qualified service for electrical, gas, cabinet, pump, motor, control or internal work.
  • Stop if the appliance label or observed part differs from the cited model/assembly.
Part typeSelected dishwashers components in GE exact-model assembly diagrams

Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.

Models explicitly covered

These model identities have the source evidence listed below. Read the part decision and suffix limits before ordering.

Required identifiers

  • Complete appliance model label: GDT655SBL5TS
  • Assembly section and diagram position
  • Original part number and any explicitly listed successor
  • Serial or production information if the manufacturer requests it

Compatibility rules

  • Evidence applies to full model GDT655SBL5TS only; it does not establish another suffix or family member's fit.
  • UPPER RACK ASSEMBLY: Position 615: DISHWASHER UPPER RACK — WD28X22843 → WD28X35784 (GE explicitly lists this successor).
  • UPPER RACK ASSEMBLY: Position 616: Dishwasher shelf cup — WD28X20177; no successor part number is asserted.
  • UPPER RACK ASSEMBLY: Position 617: BOTTLE BLASTER HOSE — WD24X20262; no successor part number is asserted.
  • UPPER RACK ASSEMBLY: Position 618: ARM SPRAY MID ASM — WD22X10089 → WD22X33498 (GE explicitly lists this successor).
  • UPPER RACK ASSEMBLY: Position 632: Dishwasher middle conduit — WD21X20309 → WD12X34182 (GE explicitly lists this successor).
  • UPPER RACK ASSEMBLY: Position 633: BOTTLE BLASTER ASM — WD22X25086 → WD22X25478 (GE explicitly lists this successor).
  • UPPER RACK ASSEMBLY: Position 634: DISHWASHER BOTTLE WASHER CLIP — WD12X22618 → WD12X25301 (GE explicitly lists this successor).
  • UPPER RACK ASSEMBLY: Position 650: Dishwasher inner rail upper rack assembly — WD30X20110; no successor part number is asserted.
  • UPPER RACK ASSEMBLY: Position 680: Dishwasher upper adjustable rack bracket — WD12X20108; no successor part number is asserted.
  • UPPER RACK ASSEMBLY: Position 726: DISHWASHER RACK HANDLE COVER — WD09X22840; no successor part number is asserted.

Never assume

  • A nearby suffix or shared model prefix uses the same components.
  • A successor mapping can be reversed or extended to another model.
  • A component in the diagram has failed or is safe to replace yourself.
  • No successor shown means a part is available, discontinued, or interchangeable.
  • Price and inventory remain current; check the manufacturer's live listing before purchase.

Read the correct assembly first

Confirm GDT655SBL5TS character-for-character on the appliance label, then open the cited GE diagram for the assembly that contains the observed component. A diagram position identifies a catalog row, not a fault code.

Compare the original number and any explicit successor independently. This page selects useful entries from the diagrams; it is not a complete service bill of materials.

UPPER RACK ASSEMBLY

  • Position 615: DISHWASHER UPPER RACK — WD28X22843 → WD28X35784 (GE explicitly lists this successor).
  • Position 616: Dishwasher shelf cup — WD28X20177; no successor part number is asserted.
  • Position 617: BOTTLE BLASTER HOSE — WD24X20262; no successor part number is asserted.
  • Position 618: ARM SPRAY MID ASM — WD22X10089 → WD22X33498 (GE explicitly lists this successor).
  • Position 632: Dishwasher middle conduit — WD21X20309 → WD12X34182 (GE explicitly lists this successor).
  • Position 633: BOTTLE BLASTER ASM — WD22X25086 → WD22X25478 (GE explicitly lists this successor).
  • Position 634: DISHWASHER BOTTLE WASHER CLIP — WD12X22618 → WD12X25301 (GE explicitly lists this successor).
  • Position 650: Dishwasher inner rail upper rack assembly — WD30X20110; no successor part number is asserted.
  • Position 680: Dishwasher upper adjustable rack bracket — WD12X20108; no successor part number is asserted.
  • Position 726: DISHWASHER RACK HANDLE COVER — WD09X22840; no successor part number is asserted.

Before ordering or requesting service

  • Record the complete model label, assembly and diagram position with the part being compared.
  • Use only the original or explicitly listed successor for this exact evidence record; ask GE to resolve any discrepancy.
  • Check the live manufacturer listing for current availability and price.
  • Confirm owner-accessible tasks in the exact manual; share these catalog details with qualified service for internal repairs.
Sources and claim boundariesReviewed 2026-10-04
GE Appliances Parts: UPPER RACK ASSEMBLY diagram for GDT655SBL5TSThe exact-model GDT655SBL5TS UPPER RACK ASSEMBLY diagram lists Position 615: DISHWASHER UPPER RACK — WD28X22843 → WD28X35784 (GE explicitly lists this successor). Position 616: Dishwasher shelf cup — WD28X20177; no successor part number is asserted. Position 617: BOTTLE BLASTER HOSE — WD24X20262; no successor part number is asserted. Position 618: ARM SPRAY MID ASM — WD22X10089 → WD22X33498 (GE explicitly lists this successor). Position 632: Dishwasher middle conduit — WD21X20309 → WD12X34182 (GE explicitly lists this successor). Position 633: BOTTLE BLASTER ASM — WD22X25086 → WD22X25478 (GE explicitly lists this successor). Position 634: DISHWASHER BOTTLE WASHER CLIP — WD12X22618 → WD12X25301 (GE explicitly lists this successor). Position 650: Dishwasher inner rail upper rack assembly — WD30X20110; no successor part number is asserted. Position 680: Dishwasher upper adjustable rack bracket — WD12X20108; no successor part number is asserted. Position 726: DISHWASHER RACK HANDLE COVER — WD09X22840; no successor part number is asserted. Checked 2026-10-04.Open official source →
Continue the decision path0 related