Industrial replacement referenceSource-backed records · No compatibility guesswork
RIReplacement Intelligence
Menu

Dishwashers · parts

PDT715SYN5FS: GE catalog dishwasher parts

GE Appliances Parts lists 11 selected components for exact dishwashers model PDT715SYN5FS across 1 diagram section(s): LOWER RACK ASSEMBLY. This reference preserves each position and original part number, then identifies a successor only where GE explicitly prints one. Match the full appliance label and assembly before ordering or requesting a service quote.

Safety boundary

  • These entries identify catalog parts and give no removal, installation or internal repair procedure.
  • The exact owner's manual controls accessible maintenance; use qualified service for electrical, gas, cabinet, pump, motor, control or internal work.
  • Stop if the appliance label or observed part differs from the cited model/assembly.
Part typeSelected dishwashers components in GE exact-model assembly diagrams

Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.

Models explicitly covered

These model identities have the source evidence listed below. Read the part decision and suffix limits before ordering.

Required identifiers

  • Complete appliance model label: PDT715SYN5FS
  • Assembly section and diagram position
  • Original part number and any explicitly listed successor
  • Serial or production information if the manufacturer requests it

Compatibility rules

  • Evidence applies to full model PDT715SYN5FS only; it does not establish another suffix or family member's fit.
  • LOWER RACK ASSEMBLY: Position 630: COATED FOLD DOWN TINE — WD28X25581; no successor part number is asserted.
  • LOWER RACK ASSEMBLY: Position 631: COATED FOLD DOWN TINE — WD28X25582; no successor part number is asserted.
  • LOWER RACK ASSEMBLY: Position 695: Dishwasher lower rack clip — WD12X20171; no successor part number is asserted.
  • LOWER RACK ASSEMBLY: Position 700: Dishwasher fold down tine indexer — WD28X20166; no successor part number is asserted.
  • LOWER RACK ASSEMBLY: Position 701: COATED LOWER RACK ASM — WD28X25580 → WD28X34745 (GE explicitly lists this successor).
  • LOWER RACK ASSEMBLY: Position 702: ROLLER CARRIER — WD12X28078 → WD01X35298 (GE explicitly lists this successor).
  • LOWER RACK ASSEMBLY: Position 704: LOWER RACK ROLLER — WD12X26146; no successor part number is asserted.
  • LOWER RACK ASSEMBLY: Position 761: Dishwasher Silverware Basket — WD28X24469; no successor part number is asserted.
  • LOWER RACK ASSEMBLY: Position 763: LID BASKET MIDDLE — WD28X24476 → WD28X24469 (GE explicitly lists this successor).
  • LOWER RACK ASSEMBLY: Position 767: LID BASKET SIDE — WD28X24477 → WD28X24469 (GE explicitly lists this successor).
  • LOWER RACK ASSEMBLY: Position 769: BLASTER SILVERWARE ASSEMBLY — WD22X22928; no successor part number is asserted.

Never assume

  • A nearby suffix or shared model prefix uses the same components.
  • A successor mapping can be reversed or extended to another model.
  • A component in the diagram has failed or is safe to replace yourself.
  • No successor shown means a part is available, discontinued, or interchangeable.
  • Price and inventory remain current; check the manufacturer's live listing before purchase.

Read the correct assembly first

Confirm PDT715SYN5FS character-for-character on the appliance label, then open the cited GE diagram for the assembly that contains the observed component. A diagram position identifies a catalog row, not a fault code.

Compare the original number and any explicit successor independently. This page selects useful entries from the diagrams; it is not a complete service bill of materials.

LOWER RACK ASSEMBLY

  • Position 630: COATED FOLD DOWN TINE — WD28X25581; no successor part number is asserted.
  • Position 631: COATED FOLD DOWN TINE — WD28X25582; no successor part number is asserted.
  • Position 695: Dishwasher lower rack clip — WD12X20171; no successor part number is asserted.
  • Position 700: Dishwasher fold down tine indexer — WD28X20166; no successor part number is asserted.
  • Position 701: COATED LOWER RACK ASM — WD28X25580 → WD28X34745 (GE explicitly lists this successor).
  • Position 702: ROLLER CARRIER — WD12X28078 → WD01X35298 (GE explicitly lists this successor).
  • Position 704: LOWER RACK ROLLER — WD12X26146; no successor part number is asserted.
  • Position 761: Dishwasher Silverware Basket — WD28X24469; no successor part number is asserted.
  • Position 763: LID BASKET MIDDLE — WD28X24476 → WD28X24469 (GE explicitly lists this successor).
  • Position 767: LID BASKET SIDE — WD28X24477 → WD28X24469 (GE explicitly lists this successor).
  • Position 769: BLASTER SILVERWARE ASSEMBLY — WD22X22928; no successor part number is asserted.

Before ordering or requesting service

  • Record the complete model label, assembly and diagram position with the part being compared.
  • Use only the original or explicitly listed successor for this exact evidence record; ask GE to resolve any discrepancy.
  • Check the live manufacturer listing for current availability and price.
  • Confirm owner-accessible tasks in the exact manual; share these catalog details with qualified service for internal repairs.
Sources and claim boundariesReviewed 2026-10-04
GE Appliances Parts: LOWER RACK ASSEMBLY diagram for PDT715SYN5FSThe exact-model PDT715SYN5FS LOWER RACK ASSEMBLY diagram lists Position 630: COATED FOLD DOWN TINE — WD28X25581; no successor part number is asserted. Position 631: COATED FOLD DOWN TINE — WD28X25582; no successor part number is asserted. Position 695: Dishwasher lower rack clip — WD12X20171; no successor part number is asserted. Position 700: Dishwasher fold down tine indexer — WD28X20166; no successor part number is asserted. Position 701: COATED LOWER RACK ASM — WD28X25580 → WD28X34745 (GE explicitly lists this successor). Position 702: ROLLER CARRIER — WD12X28078 → WD01X35298 (GE explicitly lists this successor). Position 704: LOWER RACK ROLLER — WD12X26146; no successor part number is asserted. Position 761: Dishwasher Silverware Basket — WD28X24469; no successor part number is asserted. Position 763: LID BASKET MIDDLE — WD28X24476 → WD28X24469 (GE explicitly lists this successor). Position 767: LID BASKET SIDE — WD28X24477 → WD28X24469 (GE explicitly lists this successor). Position 769: BLASTER SILVERWARE ASSEMBLY — WD22X22928; no successor part number is asserted. Checked 2026-10-04.Open official source →
Continue the decision path0 related