Dishwashers · parts
Whirlpool WDP560HAMB0 upper rack adjuster: W10350375, side housings differ
The WDP560HAMB0 (black) entry in Whirlpool repair-parts list W11634795 Rev. B maps upper-rack adjuster arm assembly W10350375, housing W10195372 on the left and W10195373 on the right, and separate tether strap W10195839 and wheel 3379676. The same figure labels stop W10082860 non-removable and W10508950 removable. This avoids treating the adjuster arm, side-specific housing, wheel, or rack-stop as one replacement part.
Safety boundary
- Unload and support the upper rack before inspecting the adjuster. Do not pry the non-removable stop; use the WDP560HAMB0 owner manual for rack removal. If the repair reaches internal wiring or plumbing, use qualified service.
Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.
Required identifiers
- Full Whirlpool model from rating label: WDP560HAMB0 (black)
- W11634795 Rev. B, printed p. 16: adjuster arm W10350375
- Side housings: left W10195372, right W10195373
- Verify rack stop type before removal: W10082860 is non-removable; W10508950 is removable
Compatibility rules
- The Whirlpool Corporation repair-parts list explicitly names model WDP560HAMB0 and identifies its finish as black.
- Printed p. 16 lists W10350375 as the adjuster-arm assembly and separately names left housing W10195372 and right housing W10195373.
- The same rack figure identifies a non-removable stop W10082860 and a removable stop W10508950; they are not interchangeable removal targets.
- The black WDP560HAMB0 lookup is not generalized to WDP560 white/stainless variants or other WDP models.
Never assume
- The left and right adjuster housings have the same part number.
- The adjuster assembly includes the rack, side housing, tether, track, or both rack stops.
- A clicking/slipping rack symptom alone identifies the failed part.
Exact black-model part list
- Whirlpool model: WDP560HAMB0 (black).
- Printed page 16: adjuster arm assembly W10350375.
- Left housing W10195372; right housing W10195373.
Stop and support distinctions
The diagram marks W10082860 non-removable and W10508950 removable. It separately lists tether W10195839 and wheel 3379676, so the adjuster-arm assembly does not include those parts by implication.
Before choosing a side
Read the entire model label and confirm which side is damaged. The exact owner manual W11532445 is identified in the same manufacturer parts list.