Dishwashers · parts
Whirlpool WDTA50SAKV0 black-stainless rack adjusters: left and right IDs
For the full WDTA50SAKV0 black-stainless model, Whirlpool list W11466550 Rev. A identifies upper rack W10847876, left-hand rack adjuster W11268105, and right-hand adjuster W11268101. Rear and front track stops are separately listed as W11084872 and W11084874. This is a model/finish-specific parts receipt; do not substitute the visually similar adjustment numbers from other Whirlpool or Maytag rack families.
Safety boundary
- Work on an unloaded rack and support it before releasing any stopper. Follow the listed model’s use-and-care/installation instructions; stop if a track or mounting point is bent instead of forcing the rack back into place.
Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.
Required identifiers
- Full model from rating label: WDTA50SAKV0 (black stainless)
- W11466550 Rev. A, printed p. 12: left adjuster W11268105
- Right adjuster W11268101
- Track stop parts W11084872 rear and W11084874 front are separate
Compatibility rules
- The Whirlpool Corporation repair-parts list cover includes WDTA50SAKV0 as black stainless.
- Its printed p. 12 parts diagram lists left and right adjustment assemblies under distinct manufacturer IDs.
- Front and rear track stops, upper rack, rack wheel, and adjusters are separate parts in the same figure.
- This identification does not extend to WDTA50SAKZ0 stainless or another WDTA model without its own complete model match.
Never assume
- W11268105 and W11268101 are interchangeable because they both adjust the upper rack.
- The rack adjuster number from another WDT or Maytag family fits this exact model.
- The upper-rack assembly includes the front/rear stops and track.
Black-stainless WDTA50 part pairing
- Model WDTA50SAKV0 is printed in W11466550 Rev. A as black stainless.
- Left adjuster assembly: W11268105.
- Right adjuster assembly: W11268101.
Other rack parts are separate
Upper rack W10847876, front stop W11084874, rear stop W11084872, and wheel-related hardware occupy separate diagram lines. Identify the actual failed side or component.
Finish and side check
Keep the terminal “KV0” in the lookup. Confirm left/right from the appliance position rather than ordering two of one side.