Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

5608J25A cross-reference: 608SMT25, TA12608H25, TXT1225, 700TR | Replacement Intelligence

Home/Cross-reference/5608J25A

Manufacturer-published cross-reference

5608J25A

Falk / Rexnord SMR cross-table row · 25:1 · AGMA unit size 608

PublisherFalk / RexnordCheckedSep 21, 2026

Claim typePublished manufacturer cross-referenceRatio25:1AGMA unit size608Open source table ↗

Models printed in this source row7

Publisher targetFalk / Rexnord5608J25A

Published comparisonBrowning608SMT25

Published comparisonDodge Torque-Arm IITA12608H25

Published comparisonDodge TXTTXT1225

Published comparisonDorris700TR

Published comparisonFalk 40004608J25C

Published comparisonLink-Belt608D24

What the evidence supportsClaim scope

Rexnord Table 1 publishes Falk 5608J25A with the listed competitor models for a 100 hp / 18 rpm selection at 1.0 service factor and 25:1 nominal ratio.

This page does say

These model numbers appear together in the cited manufacturer-published cross-reference row.
Falk / Rexnord identifies 5608J25A as the target model in that published row.
The source associates the row with 25:1 and AGMA unit size 608.

This page does not say

Every competitor model listed beside each other is independently certified as pairwise interchangeable.
Every installed accessory, bushing, motor mount, backstop, shaft, or screw-conveyor component will transfer unchanged.
The cross-reference removes the need to verify application torque, mounting, environment, and configuration.

Before treating it as a drop-in replacementVerification checklist

Ratio & speedVerify the actual ratio and required output speed.

Bushing / boreConfirm the installed shaft diameter and the required tapered bushing or bore arrangement.

AccessoriesCheck torque arm, backstop, motor mount, belt guard, screw-conveyor flange and drive shaft individually.

Torque & serviceConfirm continuous/peak torque, service factor, starts, shock load and thermal duty.

EnvelopeVerify center height, housing clearance and all mounting dimensions against the drawing.

EnvironmentConfirm lubricant, seals, ambient temperature, washdown/corrosion and hazardous-area requirements.

Search another model Field replacement checklist Source PDF ↗