Garage Door Openers · parts
Genie 3022, 3024, and 3042 cover parts: three-way match
Quick answer: use 38311R.S for model 3022, 37564R.S for 3024, and 38312R.S for 3042; Genie's same diagram lists light-lens cover 38425A.S. The three powerhead covers are model-specific, not interchangeable. This is a cover/lens identification page only.
Safety boundary
- Read the complete opener model label, including every letter suffix, and identify whether the damaged item is the powerhead cover or the separate light lens before checking a row.
- This is an identification lookup, not a cover-removal guide. If an owner's manual permits work on that cover, disconnect electrical power as that exact manual directs; keep the Safe-T-Beam system installed and active.
- Do not open or repair internal opener components, bypass safety sensors, or work on springs, cables, door balance, tracks, or other high-force door hardware. Use a trained garage-door technician for those conditions.
Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.
Models explicitly covered
These model identities have the source evidence listed below. Read the part decision and suffix limits before ordering.
Required identifiers
- Complete model label exactly 3022, 3024, or 3042
- Identify whether the part is a powerhead cover or separate light-lens cover
Compatibility rules
- Genie's family diagram identifies 3022 as ChainMax 1000, 3024 as IntelliG 1000, and 3042 as SilentMax 1000, with distinct covers 38311R.S, 37564R.S, and 38312R.S respectively.
- The same diagram lists 38425A.S as the light-lens cover for the grouped family; a shared lens does not make the three powerhead covers interchangeable.
- This evidence is diagram-backed. Direct product-detail pages for all three powerhead-cover SKUs were not confirmed in this review, so no availability or additional part claims are made.
Never assume
- The three powerhead-cover SKUs can be swapped because the models are grouped on one page.
- A family diagram proves fit on another 30xx model or a suffix not named there.
- The page gives internal repair, rail, spring, electrical, or cover-removal instructions.
Quick answer: three distinct powerhead covers
- 3022 ChainMax 1000: 38311R.S.
- 3024 IntelliG 1000: 37564R.S.
- 3042 SilentMax 1000: 38312R.S.
- Light lens listed for the family: 38425A.S.
What the diagram establishes
Genie puts these three named opener models on one diagram but gives a separate powerhead-cover row for each. Keep the model-to-cover mapping intact; there are no direct product pages for all three cover SKUs in this review.
The shared 38425A.S light-lens entry is a different part category. If the nameplate or part sought does not match these rows, use Genie's exact-model lookup before choosing a part.
Safety boundary
- Read the complete opener model label, including every letter suffix, and identify whether the damaged item is the powerhead cover or the separate light lens before checking a row.
- This is an identification lookup, not a cover-removal guide. If an owner's manual permits work on that cover, disconnect electrical power as that exact manual directs; keep the Safe-T-Beam system installed and active.
- Do not open or repair internal opener components, bypass safety sensors, or work on springs, cables, door balance, tracks, or other high-force door hardware. Use a trained garage-door technician for those conditions.