Industrial replacement referenceSource-backed records · No compatibility guesswork

Garage Door Openers · parts

Genie 6172 backup battery fit: verify part 111658.0002.S

For exact Genie Model 6172, the OEM product page describes a wall-mount smart opener with integrated battery backup. Genie’s official 111658.0002.S part page explicitly names model 6172 as compatible and describes the part as a replacement battery only. The page lists separate backup hardware for some other Genie models but does not identify a 6172 housing or harness; do not infer those parts from a grouped 6070/6170/6172H wall-mount diagram. Verify the full model and installed battery label with Genie support before ordering. Because the wall-mount unit interfaces with spring-tube hardware, this is a battery-part identification aid, not an installation or internal repair procedure.

Safety boundary

  • Confirm the visible model plate is 6172 and verify the battery-only part number with Genie; do not open the operator or touch spring-tube, shaft, cables, or balance hardware.
  • Genie’s manual says wall-mount installation/service is for a residential sectional door with front torsion springs and warns against spring/cable work; have a qualified trained service representative handle opener or high-force door hardware.
  • Do not bypass Safe-T-Beam protection or automatic reversal; stop use if safety protection is damaged or fails the manual’s owner-level check.
Part typeExact Genie Model 6172 integrated-backup battery lookup

Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.

Models explicitly covered

These model identities have the source evidence listed below. Read the part decision and suffix limits before ordering.

Required identifiers

  • Complete opener label exactly 6172; distinguish 6172H and 6172H-B variants
  • Existing battery part label, if safely available from a service receipt or non-invasive inspection
  • Whether the required item is the battery only or a housing, harness, or other backup assembly

Compatibility rules

  • The exact Genie Model 6172 product page states the wall-mount opener has integrated battery backup.
  • Genie’s 111658.0002.S replacement battery page expressly includes Model 6172 in its compatible model list and identifies the part as battery replacement only.
  • The battery page lists separately sold backup hardware for specific other models, but does not name a 6172 housing or harness; do not transfer those other model parts to 6172.
  • Genie’s wall-mount parts diagram groups 6172H and 6172H-B with other models. That group diagram is not used to claim suffix-specific 6172 housing/board fit.

Never assume

  • 111658.0002.S includes a wall-mount backup housing, wiring harness, or complete battery-backup unit; the official page says battery replacement only.
  • The 39367A.S housing listed for models 3020H/3020H-B or the 41374R.S group diagram entry fits plain 6172.
  • Plain 6172, 6172H, and 6172H-B share every battery, housing, harness, board, or accessory part.
  • Battery replacement is an instruction to open or service the wall-mounted opener near torsion-shaft components.

Exact 6172 identity

Genie’s product page names Model 6172, describes a wall-mount opener with Aladdin Connect and integrated battery backup, and links a Wall Mount Owner’s Manual. It identifies the product as a spring-tube wall-mount design, so service around that interface should be left to a qualified technician.

Battery-only part receipt

Genie’s official 111658.0002.S page explicitly lists Model 6172 as compatible and states this part is the replacement battery only. The page does not identify a housing or harness for 6172.

Keep the rest of the backup assembly unassigned

The part page names specific separate housing SKUs for some other Genie models, not plain 6172. A diagram grouping 6172H/6172H-B with other wall-mount models is not evidence that a housing shown in that group fits base Model 6172. Ask Genie to verify any non-battery replacement part against the complete model label.

Owner-safe boundary

This page identifies a battery SKU only. It does not provide battery service steps, wall-mount installation procedures, wiring directions, or spring/shaft/cable adjustments.

Sources and claim boundariesReviewed 2026-10-02
The Genie Company: Genie Model 6172 Product and Owner Manual LinksExact Model 6172 identity; wall-mount design with integrated battery backup and Aladdin Connect; states the unit attaches to the door spring tube and is not for one-piece swing doors; links the Wall Mount Owner’s Manual.Open official source →The Genie Company Store: 111658.0002.S Battery Backup Replacement BatteryDirect compatibility text names Model 6172 and describes the part as battery replacement only; lists separate backup hardware only for specified other models and says this battery cannot be externally charged.Open official source →Genie Customer Support: Model 6172 Product Support InformationNames model numbers 6172 and 6172H; states Safe-T-Beams must not be removed or disabled.Open official source →The Genie Company: Wall Mount Garage Door Opener Owner’s ManualThe exact 6172 product page links this manual; cover identifies residential wall-mount opener and requires a sectional door with front torsion springs; safety page assigns spring/cable adjustment and repair to a trained service representative.Open official source →
Continue the decision path1 related
partsGenie 6072 wall-mount opener: battery and model-scope checkOpen →