Garage Door Openers · parts
LiftMaster WLED LED pod and harness parts: check discontinued status
For exact LiftMaster model WLED, the OEM page identifies a discontinued DC battery-backup belt-drive LED Wi-Fi opener and lists LED pod with array 041D2052, LED-driver end panel 041D9202, LED harness 041D9204, cover 041D8859, and lock-capable logic board 050DCTBFLKMC. The 041D2052 part page directly names WLED but says that pod is discontinued with no compatible replacement shown. The 041D9204 page names WLED and limits that harness to applicable openers made after 2018. The board page names WLED but limits 050DCTBFLKMC to applicable models made after 2021. Verify exact model and part labels before ordering; do not assume a generic light pod or harness substitutes for WLED’s array.
Safety boundary
- Check only the visible WLED model label and existing service records; ask LiftMaster about current service options if the OEM marks a part discontinued without replacement.
- Do not open the opener, handle LED-driver wiring, work on the logic board, or attempt powerhead service; use LiftMaster support or a qualified technician.
- Never bypass entrapment-protection sensors or automatic reversal. Stop use if required safety protection is missing, damaged, or fails an owner-level manual check.
Compatibility requires a direct model listing, explicit supersession, or equivalent manufacturer evidence.
Models explicitly covered
These model identities have the source evidence listed below. Read the part decision and suffix limits before ordering.
Required identifiers
- Complete opener label exactly WLED; do not normalize it to a generic LiftMaster model family
- Existing LED pod, LED harness, or board part label from service records or a qualified technician
- Manufacture-date information requested for the 041D9204 harness and 050DCTBFLKMC board conditions
Compatibility rules
- The exact WLED model page lists 041D2052 LED pod with array, 041D9202 driver-board end panel, 041D9204 LED harness, 041D8859 cover, and 050DCTBFLKMC lock-capable board.
- LiftMaster’s 041D2052 part page directly lists WLED and marks the LED pod discontinued with no compatible replacement shown as of the verification date.
- The 041D9204 part page lists WLED and limits the LED harness to applicable openers manufactured after 2018.
- The 050DCTBFLKMC board page lists WLED and limits the lock-capable board to applicable openers manufactured after 2021; verify the specific unit’s build.
- The model diagram lists older sensor eyes/brackets 041-0365-000 and newer sensor kit 041-0136 with brackets 041-0155-000; LiftMaster restricts 041-0155-000 to the 041-0136 sensor generation.
Never assume
- An ordinary light lens, light pod, or harness is a compatible replacement for the WLED-specific 041D2052 LED array.
- The discontinued LED pod currently has a drop-in replacement; LiftMaster’s part page shows no compatible replacement at verification.
- The 041D9204 harness or 050DCTBFLKMC board fits every WLED regardless of manufacture date.
- Shared 050DCTBFLKMC fitment with 8550WLB means WLED and 8550WLB share their LED pod, harness, cover, or all other parts.
- A listed driver board or LED pod is suitable for homeowner internal electrical replacement.
Exact WLED parts receipt
LiftMaster’s exact WLED page identifies a discontinued DC battery-backup LED Wi-Fi opener and lists 041D2052 LED pod with array, 041D9202 driver-board end panel, 041D9204 LED harness, and lock-capable logic board 050DCTBFLKMC.
LED pod availability caution
LiftMaster’s 041D2052 page explicitly lists WLED and says the LED pod with array is discontinued with no compatible replacement shown. Recheck with LiftMaster or a qualified service provider before choosing any alternative; this record does not invent an aftermarket or family-level substitute.
Harness and board manufacture-date limits
The 041D9204 LED harness page lists WLED and states its applicable products were manufactured after 2018. The 050DCTBFLKMC board page lists WLED and limits that lock-capable replacement board to applicable models manufactured after 2021. Confirm the opener’s specific build before ordering.
Owner-safe boundary
Part references support identification only. LED pod, harness, logic-board, powerhead, and internal electrical service should be handled by LiftMaster or a qualified technician.