Industrial replacement referenceSource-backed records · No compatibility guesswork

Loading industrial replacement data

NORD DRIVESYSTEMS SK 971.1 replacement & specifications | Replacement Intelligence

Home/Manufacturers/NORD DRIVESYSTEMS/NORDBLOC.1 Single-Stage/SK 971.1

NORD DRIVESYSTEMS

SK 971.1

unknown

NORD introduced this model as one of three larger NORDBLOC.1 single-stage gear units in its 2019 line expansion. Record source ↗

Source-backed record · Last reviewed Sep 20, 2026Compare this model →Verification methodology →

Specifications

Known configuration

5 fields

maximum input power: 37 kWSource ↗
maximum ratio: 6.82 ratioSource ↗
maximum torque: 600 NmSource ↗
minimum ratio: 1.24 ratioSource ↗
solid shaft: 40 × 80 / 50 × 100 mmSource ↗

Manufacturer evidence

Transition notices

NORD 2019 single-stage line transition2019-08-05

NORD introduced SK 871.1, SK 971.1 and SK 1071.1 while discontinuing SK 41E and SK 51E. NORD states that the new units offer an output-shaft choice intended to match legacy customer shaft sizes. This is a group-level transition notice, not a one-to-one interchange claim.

Legacy models

SK 51E SK 41E

Successor set

SK 1071.1 SK 871.1 SK 971.1

Manufacturer notice ↗

This preserves the manufacturer’s group-level statement without asserting a one-to-one interchange. Verify the exact configuration before purchase.

Cross-reference

Replacement candidates

No verified one-to-one replacement relationship yet.

Manufacturer transition notices are kept separate from exact compatibility so a group-level product transition is never presented as a drop-in replacement.

Interchange check

What must match before substitution

6 checks

Ratio / speedConfirm the replacement produces the required output speed at the actual input speed.

Torque / dutyVerify continuous and peak torque, service factor, shock loading, starts per hour, and thermal duty.

Output geometryMatch shaft or bore diameter, key/spline/bushing, output side, usable length, and allowable overhung/thrust loads.

MountingCheck foot pattern, flange pilot/bolt circle, center height, torque arm, and mounting position.

Input / motorConfirm motor frame, adapter, input shaft or quill, power, brake, encoder, voltage, and frequency.

EnvironmentVerify lubricant, washdown/corrosion requirements, temperature, ingress protection, and hazardous-area needs.